A five-foot wardrobe from a furniture showroom rarely fits a Singapore bedroom perfectly. There is a beam to work around, a window that eats into the depth, or six inches of dead space beside the door that a standard cabinet cannot use. Off-the-shelf furniture is built for an average room, and your room is not average. This is exactly the problem custom carpentry solves.
Carpentry Services Singapore homeowners and business owners rely on covers everything built to fit a specific unit exactly: wardrobes, kitchen cabinets, TV consoles, shoe cabinets, platform beds, study built-ins and full commercial fit-outs, measured, fabricated and installed by an in-house team rather than assembled from a catalogue.
Quick Answer: Carpentry Services Singapore pricing typically runs SGD 80–450 per foot run, depending on the item and finish. A standard 4-room HDB carpentry package (kitchen cabinets plus one or two wardrobes) usually lands around SGD 6,000–14,000. Most carpentry work does not require an HDB permit, though hacking, structural changes and new electrical points do. Typical turnaround is 2–6 weeks from confirmed design to installation.
Below, we break down what Carpentry Services Singapore actually costs in 2026, which materials hold up best in the local climate, what HDB and condo rules apply, and how to choose a contractor who will not leave you with a wardrobe door that sags within a year.
Every property has different storage needs and layout constraints, so our carpentry work is grouped into three broad categories: residential, commercial and fully custom builds.
For HDB flats, condos and landed homes, we design and build wardrobes, kitchen cabinets, shoe cabinets, TV consoles, study tables, platform beds and shelving systems. Every piece is measured on-site so it uses every inch of available space, including awkward corners, beam recesses and sloped ceilings that ready-made furniture cannot handle.
Our commercial carpentry covers office workstations, reception counters, retail display shelving, storage cabinets, partitions and feature walls for offices, shops, restaurants and showrooms across Singapore. Carpentry here is usually specified for durability under daily foot traffic and coordinated with electrical and branding requirements.
When a project does not fit a standard category — a curved feature wall, a Murphy bed, a built-in banquette or a display niche — our team handles design consultation, material selection, fabrication and installation as one coordinated process, rather than passing the job between separate vendors.
Carpentry is priced mainly by the foot run — the linear length of cabinetry along a wall — rather than by square foot, because the cost is driven by carcass length, doors and hardware rather than depth. Here is a realistic 2026 range based on current Singapore contractor rates.
| Item | Price (SGD per foot run) | Notes |
|---|---|---|
| Kitchen cabinets (top + bottom) | $180 – $320 | Varies with carcass grade and countertop material |
| Built-in wardrobe (swing door) | $210 – $320 | Based on a standard 8ft height |
| Built-in wardrobe (sliding door) | $250 – $400 | Includes sliding track hardware |
| TV console with storage | $110 – $320 | Low-height vs. suspended designs |
| Study table / bookshelf | $80 – $260 | With or without drawers |
| Shoe cabinet | $120 – $300 | Half-height vs. full-height |
| Bathroom vanity | $150 – $280 | Moisture-resistant board recommended |
| Platform bed (queen, with storage) | $2,000 – $2,650 per set | Priced per set, not per foot run |
What moves the price within each range: carcass material (particleboard vs. plywood), hardware quality (soft-close hinges and drawer runners cost more but last longer), door mechanism, finish (laminate, veneer or spray paint), and whether you engage a direct contractor or an interior design firm — going direct typically saves 20–40% versus routing the same carpentry through a design firm’s markup.
Illustrative example: a typical 4-room HDB carpentry package — kitchen cabinets, one wardrobe run and a TV console — usually lands around SGD 6,000–14,000 before customisation, finish upgrades or built-in appliances.
The finish you choose affects both the look and the long-term durability of Carpentry Services Singapore homeowners install, especially in a humid climate.
| Material / Finish | Relative Cost | Durability in Singapore’s Climate | Best For |
|---|---|---|---|
| Laminate (melamine-faced board) | Baseline | Good — scratch and moisture resistant | Most HDB and condo wardrobes and cabinets |
| Wood veneer | +25% to 35% | Moderate — needs sealing, shows wear over time | Feature walls, premium study rooms |
| Spray paint / 2-pac / Duco | +40% to 50% | Good once cured — sensitive to humidity during application | Kitchen cabinets, seamless matte finishes |
| Plywood carcass upgrade | +15% to 30% over particleboard | Excellent — resists sagging and swelling | Load-bearing shelves, high-use cabinets |
Board core matters as much as the surface finish. Standard particleboard should be at least 18mm thick for wardrobe carcasses — thinner boards can bow under load within two to three years in Singapore’s humidity. For kitchens and bathrooms, insist on moisture-resistant (“green core”) board rather than standard board.
Both routes can deliver good Carpentry Services Singapore projects, but they suit different needs.
| Pillar | Direct Carpentry Contractor | Interior Design Firm |
|---|---|---|
| Cost | 20–40% lower — no design mark-up | Higher — design and project management fee included |
| Design service | Practical, function-first layouts | Full concept boards and styling |
| Trade coordination | You coordinate other trades, or engage a full-service contractor | ID firm coordinates every trade for you |
| Best for | Single-room carpentry, or a full renovation through one accountable contractor | Full home renovations needing a cohesive design concept |
As a full-service renovation contractor with an in-house carpentry team, Nextech Design Engineering combines direct-contractor pricing with the trade coordination a design firm would normally provide — you deal with one accountable team instead of juggling carpenters, electricians and painters separately.
Full-height wardrobes are typically built to match HDB ceiling heights of around 2,600mm. Carpentry that is fixed to a wall must not block a required means of escape or seal off ventilation. Freestanding or wall-fixed carpentry that does not hack or alter structural elements generally does not require an HDB permit, provided it is installed by a licensed renovation contractor — see HDB’s official renovation guidelines for the full list of permit-triggering works.
Confirm every power point, data point and under-cabinet lighting location before the carcass is fabricated. Adding a socket or LED strip after a cabinet is built usually means cutting into a finished panel, which is avoidable with proper planning during the electrical works stage.
Private condos are not governed by HDB rules, but most Management Corporation Strata Title (MCST) offices require a renovation permit and a refundable deposit before any carpentry, drywall partition or hacking work begins — this applies even to carpentry-only projects with no structural changes.
Singapore’s average humidity of 70–90% is hard on low-grade boards: cheap particleboard can swell, delaminate at the edges, or bow under sustained load within a few years. Ground-floor and landed units also carry a higher termite risk for untreated solid timber. We specify E0/E1-grade, moisture-resistant boards, properly sealed edges, and stainless steel or powder-coated hardware to avoid corrosion — details that matter far more here than in a temperate climate.
Whichever route you choose, Carpentry Services Singapore homeowners can trust should combine fair pricing with real accountability. Whether you need a single wardrobe or a full carpentry package alongside renovation, false ceiling and painting works, our team is one call away. Contact us for a free, no-obligation quotation.
Most Carpentry Services Singapore providers price per foot run, from around SGD 80 for a simple study shelf to SGD 400 per foot run for a sliding-door wardrobe. A typical 4-room HDB carpentry package costs roughly SGD 6,000–14,000.
Usually not, if the carpentry is freestanding or wall-fixed without hacking or structural changes and is installed by a licensed renovation contractor. Hacking, structural work and new electrical points are treated separately and may require approval.
Laminate is a printed, wood-grain surface bonded to board — durable, scratch-resistant and the most affordable option. Veneer is a thin layer of real wood over plywood, giving a more natural look at a higher cost, but it marks more easily and needs sealing.
A single wardrobe or kitchen cabinet run typically takes 2–3 weeks from confirmed design to installation. A full carpentry package for a 4-room flat usually takes 4–6 weeks.
Yes. Engaging a direct carpentry contractor typically costs 20–40% less than routing the same work through a design firm, and suits homeowners who already know what they want or need carpentry alongside other renovation trades.
Plywood is more resistant to sagging and moisture than standard particleboard, making it a worthwhile upgrade for heavily loaded shelves and humid areas. Particleboard at 18mm or thicker, from a reputable grade, is still suitable for most standard wardrobes and cabinets.
Yes. We carry out residential carpentry for HDB flats and condos, and commercial carpentry for offices, retail shops and F&B outlets island-wide, including coordination with your MCST or building management where approval is required.
We provide a workmanship warranty covering sagging, hinge failure and delamination. Exact terms are confirmed in writing as part of your itemised quotation.
Nextech Design Engineering Pte Ltd
